Stratus 2×2 LED Array: 600-Watt Drone Light with Reflectors

Stratus 2×2 LED array with four parabolic reflectors, product image
Product image: StratusLEDs

The Stratus 2×2 is our directional drone light: four LED modules of 150 watts each with parabolic reflectors, 600 watts in total and, according to the manufacturer, 100,000 lumens – as bright as a 10 kW HMI. It flies under the DJI S1000 or the Freefly Alta X and puts light where no stand and no boom lift can go.

Technical data

Layout 4 LED modules, 2 × 2, with parabolic reflectors
Beam angle 20°
Power 600 W (4 × 150 W)
Luminous flux 100,000 lumens, according to the manufacturer like a 10 kW HMI
Weight 2.1 kg
Dimensions 170 × 260 × 285 mm
Power supply own battery: 6S from 6 Ah or 4S from 8 Ah, XT90
Control according to the manufacturer by remote control (R/C) and DMX-512; with us switched from the ground, dimming on request
Carrier DJI S1000 or Freefly Alta X

What the 2×2 is suited for

  • Moonlight edge: a hard, clean edge of light on a car, a performer or a building.
  • Searchlight: the beam travels across road, forest or water.
  • Longer distances: the reflectors focus the light, so the drone can stay higher and further away.

With pilot or on its own

As a flying light, the 2×2 comes with light drone and pilot – everything about it is on the drone lighting page. The array on its own, for a stand or your own heavy-lift drone, is available for rental on request.

The 2×2 on video

Both videos are by the manufacturer StratusLEDs, not by VR-Copter.


2×2 array in a drone gimbal – the manufacturer shows the array as a spotlight on the drone.


Dimming by remote control – how the R/C dimming of the 2×2 works.

Related pages

Frequently asked questions

How bright is the Stratus 2×2 LED array?

According to the manufacturer 100,000 lumens at 600 watts – comparable to a 10 kW HMI.

Which drone carries the 2×2?

At VR-Copter the DJI S1000 or the Freefly Alta X. The array weighs 2.1 kg, plus the battery for the light.

How long does the 2×2 light in flight?

Around 10 to 15 minutes per battery set, followed by a battery change of a few minutes.

Request drone lighting

Phone +49 151 22840959 · info@vr-copter.de

Source of technical data: StratusLEDs, 2X2 Array.