Stratus 3×3 LED Array: 900-Watt Flood Light for the Light Drone
The Stratus 3×3 is our large drone light: nine LED modules of 100 watts each, 900 watts in total and around 100,000 lumens. Instead of reflectors, glass lenses sit in front of the LEDs – that gives a wide, soft flood light for large subjects. It flies under the Freefly Alta X or the DJI S1000.
Technical data
| Layout | 9 LED modules, 3 × 3 |
| Power | 900 W (9 × 100 W) |
| Luminous flux | around 100,000 lumens |
| Colour rendering | CRI 90 |
| Operating voltage | 24 V |
| Optics | glass lenses, no parabolic reflector |
| Beam angle | 60° |
| Control | on and off from the ground by remote control (R/C switch) |
| Carrier | Freefly Alta X or DJI S1000 |
What the 3×3 is suited for
- Soft moonlight from above: even light across car, road or set.
- Large areas: clearing, car park, shoreline, building front.
- Base light for night shoots: the 3×3 lifts the scene, the 2×2 with reflectors sets the edge.
With pilot or on its own
As a flying light, the 3×3 comes with light drone and pilot – everything about it is on the drone lighting page. The array on its own is available for rental on request.
What a 1,000-watt LED light looks like on a drone
The video is by the manufacturer (channel rctestflight), not by VR-Copter. It shows a 1,000-watt LED light on a drone – the same power class as our 3×3 with 900 watts.
Related pages
- Drone lighting: flying film light with pilot
- Stratus 2×2 LED array, 600 watts with reflectors
- Freefly Alta X · DJI S1000
- All drones, cameras and lenses
Frequently asked questions
How bright is the Stratus 3×3 LED array?
Around 100,000 lumens at 900 watts, with CRI 90.
What is the difference to the 2×2?
The 3×3 throws a wide, soft light for large areas. The 2×2 focuses its light with reflectors into a directional beam.
Which drone carries the 3×3?
The Freefly Alta X or the DJI S1000.
Request drone lighting
Phone +49 151 22840959 · info@vr-copter.de
LED modules: StratusLEDs.


